AR-PEPR Scope Mount 30mm

AR-PEPR Scope Mount 30mm Review

AR-PEPR Scope Mount 30mm Feature

• Please note: This supplier will be closed on 11/24, 11/25, 12/26 for the holidays. The shipping cut off is UPS's cut off of 12/15 to try and have the products delivered by Christmas. Note: Please check your state regulations, hunting regulations, etc before placing an order with this supplier. Your order may be canceled if the item is not able to be shipped to your state due to their regulations.

Proper Eye Position Ready for combat riflescopes, this mount provides 2" of forward scope positioning on the M-4 and AR-15 platform. Ring bases are milled as a single, tough unit and ring tops feature Picatinny tops for mounting additional accessories.

Weigand Ruger Single Six Revolver Scope Mount. Black

Weigand Ruger Single Six Revolver Scope Mount. Black Review

Finally a no drill and tap Weaver style scope mount for the Single Six. This scope mount requires no drilling or tapping of your frame. Handsome, lightweight and durable. Blends beautifully with the lines of the Ruger frame. Accepts all Weaver style rings and accessories. 4-1/2" long, available in black or silver, matte anodized finish, weighs 1.3 ounces. This scope mount attaches to the rear sight elevation adjusting screw hole. You first remove the single six rear sight and replace it with our scope mount. Then insert the supplied screw into the elevation adjusting screw hole and tighten. In the front there is a set screw, that gets adjusted down just until it touches the top strap.* All of the testing of this mount was done with .22 Magnum without a single issue. We have sold hundreds of these mounts with tremendous success. * Over tightening of the set screw can cause point of impact problems. It will cause the revolver to hit low.

Benjamin Sheridan B272 4-Piece 3/8" Dovetail Inter-mount for Benjamin Sheridan Airguns

Benjamin Sheridan B272 4-Piece 3/8" Dovetail Inter-mount for Benjamin Sheridan Airguns Review

Benjamin Sheridan B272 4-Piece 3/8" Dovetail Inter-mount for Benjamin Sheridan Airguns Feature

• SCOPE MOUNTS

This 4-Piece intermount readies your Benjamin and Sheridan air rifles and air pistols (current production) for sighting devices.

Crosman Center Point Full Size High Profile Integral Mount for Airgun or Premium .22 Rifle Scope

Crosman Center Point Full Size High Profile Integral Mount for Airgun or Premium .22 Rifle Scope Review

Crosman Center Point Full Size High Profile Integral Mount for Airgun or Premium .22 Rifle Scope Feature

• High Profile
• 1" Scopes
• 1 Piece
• Dovetail - fits 3/8 grooved
• Reversible lock-Inchg plate and stop p-Inch

All CenterPoint rings and accessories are precision machined from aircraft grade aluminum alloy, with anodized black matte finish. They’re built to withstand the recoil of the most powerful firearms on the market today and, with their ease of use and secure fit, they’re compatible with a full range of riflescopes and rails.

UTG Max Strength LE Grade Quick Detach Picatinny Scope Rings (2 Piece, 1-Inch Diam, 6-Screw Hi Profile)

UTG Max Strength LE Grade Quick Detach Picatinny Scope Rings (2 Piece, 1-Inch Diam, 6-Screw Hi Profile) Review

UTG Max Strength LE Grade Quick Detach Picatinny Scope Rings (2 Piece, 1-Inch Diam, 6-Screw Hi Profile) Feature

• 6-screw High Profile "Dragon" Ring, Precision Machined From Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish
• Robust and User Friendly Ergonomic Quick Detach/Lock Lever Fully Adjustable to Fit on Any Picatinny Rail
• High Quality Synthetic Protective Tape Applied on Rings Internal Surface
• Tight Tolerance Control and Repeatable Positive Locking for Optimal Re-zero Performance
• Extensively Field Tested under Extreme Operations and Well Received by Field Experts and Law Enforcement Personnel

UTG Law Enforcement Grade Quick Detach Lever Lock Universal Picatinny Mount (UPM) – 2PCs 1” Rings, Fully Adjustable for Most Secured Lock, 25mm Wide, 20mm Saddle Height, High Profile, See-Thru, Fits Scopes up to 65mm Objective Diameter, 6 Top Screws

1" Ring-3/8" Dovetail-High

1" Ring-3/8" Dovetail-High Review

1" Ring-3/8" Dovetail-High Feature

• Dovetail 1-Inch/ 30 mm. Black.

(2) 1 inch Dovetail rings. Aluminum construction. Weight: 1.8 ounces Overall Height: 1.95 inches Height: 1.43 inches

AccuShot Airgun .22 Full Length Integral Mid Profile Mount for 30mm Tube Scope

AccuShot Airgun .22 Full Length Integral Mid Profile Mount for 30mm Tube Scope Review

AccuShot Airgun .22 Full Length Integral Mid Profile Mount for 30mm Tube Scope Feature

• Precision Machined from Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish.
• Complete with Stop-Pin for Rock Solid Application.
• Ring Base Designed with Locking Hex Screws to Tightly Fit on Mounts with Airgun/.22 Dovetail Dimensions.
• Reversible Locking Plate to Fit Full Range of Airgun/.22 Rails
• Great Quality at Most Affordable Price.

AccuShot Airgun/.22 Full Length Integral Mount, for 30mm Tube Scope, Mid-Profile, 4 Screws/Each Ring, Fits Scopes upto 45mm Obj - Length 100mm

UTG Scope Mount Base, Fits RWS Diana 48, 52, 54 & 460 Magnum, Compensates for Droop & Stops Scope Shift

UTG Scope Mount Base, Fits RWS Diana 48, 52, 54 & 460 Magnum, Compensates for Droop & Stops Scope Shift Review

UTG Scope Mount Base, Fits RWS Diana 48, 52, 54 & 460 Magnum, Compensates for Droop & Stops Scope Shift Feature

• SCOPE MOUNTS

font color=redWe strongly recommend that you use a 2-piece Weaver scope mount that has 4 screws on each ring cap.font DN460 scope mount base Fits RWS Diana sidelevers.48, 52 & 54.and 460 Magnum underlever Attaches to rifle's 11mm scope rail Decreases barrel droop with 17.1 upward compensation at 30 yds Special recoil shock shoulder stops scope shift--forever! Hide rifle's 11mm scope rail; looks professional Scope base provides secure scope mounting with WeaverPicatinny mounts 3 hex screws attach base to your Diana rifle Includes 2 hex wrenches

Mark III Tactical Mil-Dot 3-9X42/Scope Adaptor Mount/Red Dot Combo Package

Mark III Tactical Mil-Dot 3-9X42/Scope Adaptor Mount/Red Dot Combo Package Review

Mark III Tactical Mil-Dot 3-9X42/Scope Adaptor Mount/Red Dot Combo Package Feature

• Mark III tactical scope with backup red dot sight
• Fully multicoated lenses offer brightness and clarity
• Red/green illuminated mil-dot reticle with multiple brightness settings
• Ring mounts directly to ocular lens housing with Weaver-style platform
• Measures 7.54 inches long; weighs 16.7 ounces

Built using the Ultimate Sighting System (USS), the Mark III Tactical 3-9x42 scope combines the benefits of a Mark III tactical scope with the advantage of a backup red dot sight. The system is equipped with a Mark III tactical scope and a specially designed MRD34 ring. The ring, which mounts directly to the ocular lens housing with a built-in Weaver-style platform, stabilizes the DDAB red dot sight so you can lock confidently lock on your target. With the scope and sight, the USS is perfect for both close quarter battle and long-range shooting.

The scope also includes fully multicoated lenses for brightness and clarity, along with a red/green illuminated mil-dot reticle with multiple brightness settings. Other features include open target turrets, a bullet drop compensator calibrated for the .223 cartridge with a 55-grain bullet, a rotating mount for users who prefer offset functionality, a built-in sunshade, and a quick-focus eyepiece.

Specifications

• Magnification: 3-9x
• Objective lens diameter: 42mm
• Field of view: 36.8 to 12.0 @ 100 yards
• Eye relief: 2 inches
• Exit pupil: 9.3 to 3.1mm
• Reticle: Mil-dot
• Click value: 1/2 MOA
• Exterior finish: Matte black
• Lens coating: Green
• Mount: Integrated Weaver-style quick release
• Length: 7.54 inches
• Weight: 16.7 ounces

Mark Iii Tactical Mil-Dot 3-9x42 scope Adaptor Mount red Dot Combo Package

Remington Model 700 Rifle Integral Scope Mounts - Black

Remington Model 700 Rifle Integral Scope Mounts - Black Review

Will fit most model 700 Remington rifles. 2 piece set with base and lower ring. Medium rise mount. Constructed of Z-2 alloy (50% stronger than aluminum). Torx grade 8 tactical screws included.

UTG Weaver Picatinny Style Tactical Low Profile Mount

UTG Weaver Picatinny Style Tactical Low Profile Mount Review

UTG Weaver Picatinny Style Tactical Low Profile Mount Feature

• Excellent quality and easy to install
• Weaver/Picatinny style; tactical low profile for all scope applications
• 5.5 inches long with 13 slots on rail
• Allow for flexible eye relief adjustments
• Complete with screws for installation on Mossberg 500 Series and compatibles

Weaver/Picatinny Style Tactical Low Profile Scope Mount for Mossberg Shotguns, 5.50” (140mm) Long with 13 Slots, Complete with Screws for Installation

Wideview See Thru Scope Mount for the CVA, Ultramag , Kodiak Pro, Wolf and other firearms

Wideview See Thru Scope Mount for the CVA, Ultramag , Kodiak Pro, Wolf and other firearms Review

Wideview See Thru Scope Mount for the CVA, Ultramag , Kodiak Pro, Wolf and other firearms Feature

• Fits the CVA Optima,Ultramag 209, Kodiak Pro, Wolf, Remington Genesis Muzzle Loader, Traditions Pursuit and Winchester LX-150 firearms
• This scope mount is made of aluminum extrusion anodized bright for lifetime use
• The screws are heat treated socket cap screws and they have a special oversize head for more holding power in the aluminum
• These see-thru mounts allow you to use the iron sights as well as the scope so you won't miss that close running shot. Also great in winter when the only thing you see in your scope are snow flakes
• 100% Manufactured in the USA

THE WIDEVIEW SEE THRU SCOPE MOUNT IS MANUFACTURED IN THE USA SINCE 1970. THIS PRODUCT IS MADE OF ALUMINUM EXTRUSION ANODIZED BRIGHT FOR LIFETIME USE. THE SCREWS ARE HEAT TREATED SOCKET CAP SCREWS. THEY HAVE AN SPECIAL OVERSIZE HEAD FOR MORE HOLDING POWER IN THE ALUMINUM . THE THREADED HOLES ARE ROLLED RATHER THAN CUT FOR 60% MORE STRENGTH. THESE MOUNTS SCREW DIRECTLY TO THE RECEIVER. THESE SEE-THRU MOUNTS ALLOW YOU TO USE THE IRON SIGHTS AS WELL AS THE SCOPE SO YOU WON'T MISS THAT CLOSE RUNNING SHOT. ALSO GREAT IN WINTER WHEN THE ONLY THING YOU SEE IN YOUR SCOPE IS SNOW FLAKES.

UAG Mosin Nagant 2-7x32 Long Eye Relief Scope + New Generation Weaver Rail Mount + Scope Rings+ Lens Covers+Lens Cleaning Kit

UAG Mosin Nagant 2-7x32 Long Eye Relief Scope + New Generation Weaver Rail Mount + Scope Rings+ Lens Covers+Lens Cleaning Kit Review

UAG Mosin Nagant 2-7x32 Long Eye Relief Scope + New Generation Weaver Rail Mount + Scope Rings+ Lens Covers+Lens Cleaning Kit Feature

• MAGNIFICATION-2x-7x ADJUSTABLE
• OBJECTIVE DIAMETER- 32mm, TUBE DIAMETER. : 1"
• FIELD OF VIEW @ 100 YRS ( FEET ) : 14-4.5 /// CLICK VALUE@100 YARDS-1/4"
• EYE RELIEF ( INCH ) : 8.7-10.65
• EXIT PUPIL ( MM ) : 16-4.6

Official UAG Mosin Nagant 2-7x32 Long Eye relief scope and mount package. Includes the 2-7x32 Duplex Reticle Long Eye Relief scope, Mosin Nagant Weaver Mount, mounting hardware, rings, lens cleaning kit, and lens covers. The scope is Nitrogen filled, fogproof, shock proof to withstand and perfrom under the highest recoil, and water resistant. Features a duplex reticle for sharper aiming points and a clear and bright field of view. Lenses are multi coated blue for lowlight conditions and is fully adjustable for windage and elevation click adjustments. Includes see through lens covers, deluxe cleaning kit, as well as Premium "QD" 7/8 weaver scope rings. The included Mosin Nagant mount fits most Mosin Nagant rifles including most Russian-Polish-Chinese-Hungarian models M44, 91-30, M91-30 as well as various 30's- 7.62x54R Carbines. Approximately 6.61" long, this mount is made from high grade aircraft aluminum with a black anodized finish and will give you a WEAVER/ PICATINNY 7/8" rail mounting platform for your included UAG MOSIN NAGANT SCOPE or other weaver based scopes-sights-lasers-lights. Easy Installation

3-9X42 Red and Green Illuminated AR15 Rubber Scope/Carry Handle Mount/Rings/Ruby Lens

3-9X42 Red and Green Illuminated AR15 Rubber Scope/Carry Handle Mount/Rings/Ruby Lens Review

3-9X42 Red and Green Illuminated AR15 Rubber Scope/Carry Handle Mount/Rings/Ruby Lens Feature

• Includes built in lens caps and aluminum weaver style rings
• One piece aluminum main tube with rubber outer coating
• Reticles illuminate red or green with multiple brightness settings
• Multi-coated lenses
• Magnification: 3x-9x

Features: One piece aluminum main tube with rubber outer coating Multi Coated Lenses Reticles illuminate Red or Green with multiple brightness settings Includes built in lens caps and AR-15 carry handle mount Specifications: Magnification: 3X-9X Tube Dia.: 30mm Objective Dia. (mm): 42.00 FOV (Feet @ 100 yds:) 37.7-12.5 Eye Relief (in): 3 Exit Pupil(mm): 14-4.7 Reticle: P4 Sniper N.W(OZ.) 16.0 Length (in): 7.75 Click Value: 1/2 M.O.A Exterior Finish: Rubber Coated Lens Coating: Ruby Mount: Integrated (AR-15/M16 carry handle)

Crosman Center Point Full Size Two-Piece Medium Profile Integral Rifle Scope Mount for Airguns or Premium .22 Rifles

Crosman Center Point Full Size Two-Piece Medium Profile Integral Rifle Scope Mount for Airguns or Premium .22 Rifles Review

Crosman Center Point Full Size Two-Piece Medium Profile Integral Rifle Scope Mount for Airguns or Premium .22 Rifles Feature

• Medium Profile
• 1" Scopes
• 2 Piece
• Dovetail - fits 3/8 grooved
• Reversible lock-Inchg plate and stop p-Inch

All CenterPoint rings and accessories are precision machined from aircraft grade aluminum alloy, with anodized black matte finish. They’re built to withstand the recoil of the most powerful firearms on the market today and, with their ease of use and secure fit, they’re compatible with a full range of riflescopes and rails.

UTG Max Strength LE Grade Quick Detach Picatinny Scope Rings (2 Piece, 1-Inch Diam, 4-Screw Lo Profile)

UTG Max Strength LE Grade Quick Detach Picatinny Scope Rings (2 Piece, 1-Inch Diam, 4-Screw Lo Profile) Review

UTG Max Strength LE Grade Quick Detach Picatinny Scope Rings (2 Piece, 1-Inch Diam, 4-Screw Lo Profile) Feature

• 4-screw Low Profile "Tiger" Ring, Precision Machined From Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish
• Robust and User Friendly Ergonomic Quick Detach/Lock Lever Fully Adjustable to Fit on Any Picatinny Rail
• High Quality Synthetic Protective Tape Applied on Rings Internal Surface
• Tight Tolerance Control and Repeatable Positive Locking for Optimal Re-zero Performance
• Extensively Field Tested under Extreme Operations and Well Received by Field Experts and Law Enforcement Personnel

UTG Law Enforcement Grade Quick Detach Lever Lock Universal Picatinny Mount (UPM) – 2PCs 1” Rings, Fully Adjustable for Most Secured Lock, 18mm Wide, 10mm Saddle Height, Low Profile, Non-See-Thru, Fits Scopes up to 45mm Objective Diameter, 4 Top Screws

Weaver Top Mount Matte Black Base Pair - Remington 700

Weaver Top Mount Matte Black Base Pair - Remington 700 Review

Weaver Top Mount Matte Black Base Pair - Remington 700 Feature

• Top Mount Aluminum Bases (Pairs)
• Each Weaver Base is machined to tight tolerances for a custom fit
• Aluminum bases offer maximum strength for rings to hold tight

There's no longer a need to search for front and rear bases for your most popular firearms. Weaver Base Pairs feature tough, lightweight aluminum construction to hold up to the most powerful recoil. The Weaver cross lock design means a tight, secure fit on your firearm. These bases accept all Weaver top mount cross lock rings. Weaver's extensive line of bases provides a precision fit to custom match your Weaver rings of choice. Whether you need a base to accommodate your modern sporting rifle, a competition pistol, inline muzzleloader or your favorite bolt-action hunting rifle; every one of our mounts delivers a solid start.